JLG 340AJ Operator Manual - Manual (Page 98)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-18 – JLG Lift – 3121258
9. Charge Filter
Interval - Change after first 50 hrs. and every 6 months or
300 hrs. thereafter.
Comments - Remove the engine tray retaining bolt and
pull out engine tray to gain access.
6.4 TIRES & WHEELS
Tire Replacement
JLG recommends a replacement tire be the same size, ply and
brand as originally installed on the machine. Please refer to the
JLG Parts Manual for the part number of the approved tires for a
particular machine model. If not using a JLG approved replace-
ment tire, we recommend that replacement tires have the follow-
ing characteristics:
• Equal or greater ply/load rating and size of original
• Tire tread contact width equal or greater than original
• Wheel diameter, width, and offset dimensions equal to
the original
• Approved for the application by the tire manufacturer
(including inflation pressure and maximum tire load)
Unless specifically approved by JLG Industries Inc. do not
replace a foam filled or ballast filled tire assembly with a pneu-
matic tire. When selecting and installing a replacement tire,
ensure that all tires are inflated to the pressure recommended
by JLG. Due to size variations between tire brands, both tires
on the same axle should be the same.