JLG 510AJ Operator Manual - Manual (Page 91)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121179 – JLG Lift – 6-9
Major Component Weights Hydraulic Oil
NOTE: Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service. JLG Industries
recommends Mobilfluid 424 hydraulic oil, which has an
SAE viscosity index of 152.
NOTE: When temperatures remain consistently below 20
degrees F. (-7 degrees C.), JLG Industries recommends
the use of Mobil DTE13.
Table 6-18. Component Weights - 450
Component Pounds Kilograms
Frame (Bare) 2325 1055
Turntable (Bare) 1500 680
Boom Link 180 82
Boom Timing Link 30 14
Upper Upright 217 98
Lower Upright 115 52
Lower Boom 497 225
Mid Boom 385 175
Upper Boom 1065 484
4 Wheel Drive Axle 200 91
2 Wheel Drive Axle 235 107
Table 6-19. Component Weights - 510
Component Pounds Kilograms
Engine Only 440 200
Upper Boom 1257 570
Frame (Bare) 2105 955
Turntable (Bare) 1533 695.5
Table 6-20. Hydraulic Oil
Hydraulic System Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F
(-18° to +83° C)
10W
+0° to + 210° F
(-18° to +99° C)
10W-20, 10W30
+50° to + 210° F
(+10° to +99° C
20W-20