Exhaust venturi adjustment -146 – JLG 680S Service Manual User Manual
Page 194
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-146
– JLG Lift –
3121234
A
B
D
C
A. Exhaust Venturi
B. 1/4" (6.35 mm) minimum clearance all around.
C. 3/4" (19.05 mm) minimum engagement
D. Exhaust Pipe Outlet
NOTE: The outlet pipe must be centered within 1/4" (6.35 mm)
minimum clearance to the exhaust venturi all around the
venturi’s perimeter. If the exhaust pipe touches the venturi,
it will transfer heat and melt the hood. If the exhaust pipe
is not centered, adjust the muffler or outlet as needed to
achieve the necessary clearance.
Figure 3-91. Exhaust Venturi Adjustment
Advertising