Fork mounted hook, Fork mounted hook -28 – JLG 40xxPS Operator Manual User Manual
Page 108
Section 5 - Attachments and Hitches
5-28
31200205
Fork Mounted Hook
Use Fork Mounted Hook Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-4.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The joystick (1) controls movement of the boom.
The attachment tilt roller switch (2) controls fork mounted hook tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Ensure carriage is properly installed. Refer to “Attachment Installation” on
• Secure the fork mounted hook to the forks by sliding the fork mounted hook onto
the parent forks and install the retaining pin behind the vertical shank of the fork.
OY0640
OZ2590
2
1