JLG 40xxPS Operator Manual - Manual (Page 47)

Section 3 - Controls and Indicators
3-11 31200205
Park Brake
The park brake lever (1) controls the application and release of the park brake.
• Pull lever back to apply park brake.
• Squeeze release (2) or lift detent ring (3) and push lever forward to release park
brake.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow “Shut-Down Procedure” on page 4-3.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake switch to "ON"
position, lower boom to ground and stop engine before leaving cab.
WARNING
CRUSH HAZARD. Applying park brake while traveling will cause unit to stop
abruptly and could cause load loss. To stop the machine in an emergency, apply
the park brake. 17M Only - Turning engine off also applies the park brake.
OZ2290
2
1
3
1
8, 9, 12 & 13M 17M