Ignition, Ignition -10 – JLG 40xxPS Operator Manual User Manual
Page 46
Advertising

Section 3 - Controls and Indicators
3-10
31200205
Ignition
• Position 0 - Engine off.
• Position I - Voltage available for all electrical functions.
• Position II - Engine preheat at temperatures below 0° C (32° F). Wait to start
engine until preheat indicator on instrument panel goes out.
• Position III - Engine start. In the event the engine does not start, rotate key to
position 0 then back to position III to re-engage the starter.
• Position P (if equipped for platform) - Power transferred to platform.
Note: Key is removable in the 0 and P positions.
OZ2300
0
I
II
III
P
Advertising
This manual is related to the following products: