JLG 40xxPS Operator Manual - Manual (Page 111)

Section 5 - Attachments and Hitches
5-31 31200205
Truss Boom
Use Appropriate Truss Boom Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-4.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The joystick (1) controls movement of the boom.
The attachment tilt roller switch (2) controls truss boom tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-11.
Operation:
• Weight of rigging must be included as part of total load being lifted.
OZ0780
OZ2510
2
1