JLG 40xxPS Operator Manual - Manual (Page 152)

Section 7 - Lubrication and Maintenance
7-22 31200205
Windshield Washer System
A. Windshield Washer Fluid Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open engine cover.
3. The windshield washer fluid should be visible in the reservoir (1).
4. If washer fluid level is low, remove reservoir cap (2) and add fluid as needed.
5. Replace reservoir cap.
6. Close and secure engine cover.
50
OW0980
OAL2040
OZ3680
1
2