JLG X550AJ Operator Manual - Manual (Page 128)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-26 – JLG Lift – 3128791
79
Incorrect start
Cause – Incorrect starting procedure.
Solution – Check electrical connections. This is generally a tem-
porary problem due to certain working conditions. If problem per-
sists, replace inverter.
86
Pedal wire KO
Cause –
Solution – This is generally a temporary problem due to certain
working conditions. If problem persists, replace inverter.
93
Wrong set batt
Cause – With power connected, battery test detected incorrect
batteries fitted.
Solution – Replace batteries with the original ones supplied
directly by JLG.
94
Current sensor KO
Cause – Set up procedure for maximum current in progress.
Solution – Contact JLG after-sales service.
99
Check up needed
Cause –
Solution – Contact Hinowa after.sales service.
Table 6-10. Inverter Fault Codes
CODE DESCRIPTION