JLG M4069 Service Manual - Manual (Page 123)

SECTION 6 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
3121639 – JLG Lift – 6-11
HD30/HDP20 Series Disassembly
Figure 6-16. HD/HDP Contact Removal
1. With rear insert toward you, snap appropriate size
extractor tool over the wire of contact to be
removed.
2. Slide tool along into the insert cavity until it engages
contact and resistance is felt.
3. Pull contact-wire assembly out of connector.
Figure 6-17. HD/HDP Unlocking Contacts
NOTE: Do Not twist or insert tool at an angle.