JLG M4069 Service Manual - Manual (Page 66)

SECTION 3 - CHASSIS & SCISSOR ARMS
3-34 – JLG Lift – 3121639
Cover Disassembly
1. Remove O-ring (1) from the groove in the Cover (2).
2. Remove the Thrust Washer (3) from Cover pockets.
3. Unscrew the two Hex Head Bolts (4) and remove the
Disengage Cap (5) from the Cover.
4. Pull Disengage Rod (6) out of the Cover.
5. Use an appropriate tool to remove the O-ring (7)
from the internal groove in the Cover.
6. Remove the two O-ring Pipe Plugs (8) from the
Cover.
1. O-Ring
2. Cover
3. Thrust Washer
4. Hex Head Bolts
5. Disengage Cap
6. Disengage Rod
7. O-ring
8. O-ring Pipe Plugs
Figure 3-22. Cover Disassembly