JLG 800A_AJ ANSI Parts Manual - Manual (Page 186)

2-140 800A 800AJ 3121176
SECTION 2 TURNTABLE
123 See Note 1 Insulation, Heat (GM Engine Only) (was p/ns 2820176 &
1001101323) (Note: Use Item 101)
(Note: Cover complete inside of hood with insulation.
Fasten with Item 125 Tape.)
124 See Note 1 Insulation, Heat (GM Engine Only) (was p/ns 2820153 &
1001101324) (Note: Use Item 101)
(Note: Cover complete inside of hood with insulation.
Fasten with Item 125 Tape.)
125 1001117140 AR Tape (GM Engine Only):
126 0100011 AR Compound, Locking
1671228 Ref HOOD ASSEMBLY (TANK SIDE) A
201 1671231 1 Hood
202 1671232 1 Frame, Tubular
203 2940088 2 Latch
204 0721008 4 Screw, Machine #10-24NC x 1in
205 4751000 4 Flatwasher #10
206 3311005 4 Locknut #10-24NC
207 2600233 1 Hinge
208 1321384 4 Hold Down
209 0641606 9 Bolt 3/8in-16NC x 3/4in
210 4711600 9 Flatwasher 3/8in Narrow
211 3960464 83in/2.11m Seal
212 3960438 55in/1.4m Seal
213 3960462 53in/1.35m Seal
0256823 Ref NOISE REDUCTION INSTALLATION (DEUTZ/CATERPILLAR
ENGINE MACHINES) 3/C
301 2820078 1 Foam, Acoustical (Turntable Side)
302 to 304 Not Used
305 3539955 1 Plate, Baffle
306 0641506 2 Bolt 5/16in-18NC x 3/4in
307 4751500 2 Flatwasher 5/16in
308 0100011 AR Compound, Locking
FIGURE 2-26. HOODS INSTALLATION (SN 0300089982 TO SN 0300140000) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.