JLG 800A_AJ ANSI Parts Manual - Manual (Page 372)

7-26 800A 800AJ 3121176
SECTION 7 ELECTRICAL
FIGURE 7-3. HARNESS COMPONENTS INSTALLATION WITH UGM
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref NOTE: FOR MODULE IDENTIFICATION, REFER TO REVISION
LOG PAGE A.
1001114448 Ref PLATFORM BOX ASSEMBLY COMPONENTS C
1 to2 Not Used
3 0100048 AR Grease, Dielectric
4 to 5 Not Used
6 AR Footswitch Components:
6A 1060918 7ft/2.13m Cable, Electrical - 18/3
4460042 3 Terminal, Ring
4460226 2 Socket, Female
4460464 1 Pin, Male (16 Gauge)
6B 4460071 2 Connector, Strain Relief
7 to 12 Not Used
13 See Note 1 Controller Harness Assembly (Lift and Swing) (Note: Not
Available for Purchase.)
13A 7022819 1 Plug, Male - 8 Position (Natural)
4460871 8 Socket, Female
14 See Note 1 Controller Harness/Circuit Board Assembly (Drive and Steer)
(Note: Not Available for Purchase.)
14A 7022825 1 Plug, Male - 8 Position (Black)
4460871 7 Socket, Female
15 to 30 Not Used
31 See Note 1 Controller Harness (Speed Control) (Note: Not Available for
Purchase.)
31A 4460224 1 Receptacle, Female - 6 Position
4460226 6 Socket, Female
32 to 35 Not Used
36 4460428 2 Connector, Strain Relief
37 4460470 1 Nut, Terminal
38 4460471 1 Lockwasher, Terminal
39 4460708 2 Connector, Female 15 Position
40 4460905 5 Seal, Plug
41 to 42 Not Used
43 4922666 1 Harness, Analyzer Cable 2/B
4460226 4 Socket, Female (Not Shown - Located at J2)
43A 4460761 1 Connector, Female - 4 Position
4460227 4 Pin, Male
44 Not Used
45 1001107753 1 Harness, Console Box (See Items 101-144 for Breakdown)
1001107753 Ref PLATFORM BOX HARNESS ASSEMBLY C
101 to 118 Not Used
119 4460866 1 Connector 19 Position
4460464 7 Pin, Male (16 Gauge)
4460508 3 Pin, Male (12 Gauge)
120 4460874 1 Plug, Male 35 Position (Natural)
4460871 29 Socket, Female