Connector assembly figure 2 -5, Connector assembly figure 3 -5, Connector assembly figure 4 -5 – JLG 800S Service Manual User Manual
Page 347
Advertising
SECTION 7 - BASIC ELECTRICAL INFORMATION & SCHEMATICS
3121139
– JLG Lift –
7-5
3. After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Release the locking latches by squeezing them
inward (See Figure 7-8.).
4. Slide the wedge lock into the housing until it is flush
with the housing (See Figure 7-9.).
Figure 7-7. Connector Assembly Figure 2
Figure 7-8. Connector Assembly Figure 3
Figure 7-9. Connector Assembly Figure 4
Advertising
This manual is related to the following products: