Mast side profile mast chain adjusters – JLG 19BD Service Manual User Manual
Page 57
Advertising
SECTION 2 - SERVICE PROCEDURES
3121154
– JLG Lift –
2-35
Figure 2-9. Mast Chain/Sequence Cable Adjustment Components. (15BD)
SECTION-1
FIXED
TO BASE
SEQUENCE CABLE
ADJUST NUT
SECTION-2
EXTENDED BY
CYLINDER
SECTION-4
(PLATFORM
HEADER SECTION)
EXTENDED BY
CHAIN
CHAIN
ANCHOR PLATE
ADJUST NUT
JAM NUT
THREADED
CHAIN END
SECTION-3
EXTENDED BY
CHAIN
STEP APPROXIMATELY
1/4 in. (6.5mm)
MAST SIDE PROFILE
MAST CHAIN ADJUSTERS
Note: When
pply Loctite #242 to
the threads under the
jam nut.
chain adjustment
is complete, before
tightening the jam nut
against the adjust nut,
a
Advertising
This manual is related to the following products: