IOGear GWHDMS52 - Manual (Page 22)

22
Advanced Operation
Naming the Input Source Devices
1. Press and hold the Source button on the top of transmitter for over 3 seconds.
A source naming OSD will appear on the screen:
2. The current source input may be
named by pointing the remote control
at the transmitter and using the remote
control  keys to change the letters or
numbers; keys to move the cursor.
3. After completing source naming, please press the source key on the remote control or on
the top of transmitter housing to confirm and save the new source name.
4. You will see the new source name on the OSD for both transmitter and receiver each time
the source with the new name is selected.
Moves the cursor
left or right
Changes letters
and numbers
CHANGE SOURCE NAME
NAME= HDMI1