IOGear GWHDMS52 - Manual (Page 25)

25
4. Enter “Remove Transmitter” menu if you would like to remove a transmitter
OSD Displays:
5. Enter “Modify Transmitter Name” menu if you would like to modify a transmitter name
OSD shows:
Remove Transmitter:
→ GWHDMS52
→ GWHDMS52
 Return
Edit Transmitter name:
→ GWHDMS52
→ GWHDMS52
 Return
Edit Transmitter name:
→ GWHDMS52
 Return IR Key=Delete

= A~Z+0~9

= cursor
Press the Up/Down keys on the remote to select alphabet characters; Press the Left/
Right keys on the remote to move the cursor; Press IR key to back space.

Using the remote control, press the up/down
arrow keys to select the transmitter to be
removed and press OK.
Using the remote control, press the up/
down arrow keys to select the transmitter to
have its name modified and press OK
Once Transmitter 2 and Receiver 1 are connected and video is displayed, you may apply
power to Transmitter 1. Receiver 1 will now see 2 transmitters and can be selected via
the Transmitter No. button on the remote control. To add Transmitter 3 and 4, repeat
steps 1 ~ 4.
Note – You may connect multiple transmitters but you may only have one receiver
running at any given time. When Receiver 1 is connected to Transmitter 2, Receiver 2
will be disconnected and need to be re-paired to restore wireless video function with
Transmitter 2.