2N Analogue UMTS gateway 2N EasyGate UMTS USB - Quick Start User Manual
Page 3
Advertising
10) The modem is properly installed, choose “Finish“
11) During installation 3 new hardware items are found and have to be installed. For all items use the
procedure described up. After installing all new hardware items following is added to device manager
(Control panels ‐>System‐>Hardware‐>Device manager):
Telit HSDPA USB Modem
Telit Auxiliary Port
Telit Diagnostics Interface
Device manager with these hardware items is shown down. The numbers of COM ports can differ.
Advertising