Installation into communicator – 2N Home intercom 2N Helios - Manual - display installation User Manual

Page 3

Advertising
background image

- 3 -

Installation into communicator

Display with recorded phone list is possible to install into door communicator:

1. Remove metal cover from the door phone.

Dismount the front plastic panel from the back
plastic panel.



2. From the back and front plastic panels, cut off

plastic shoulders by using small clippers.

3. From the long double line connectors on main board remove all connectors (jumpers) and

then connect main board of display.

Advertising
See also other documents in the category 2N Accessories communication: