2N Omega Lite - Basic Services v1.3 - Manual (Page 17)

2N
®
- OMEGA Lite
Basic services
User manual – Basic services
www.2n.cz
16
1.12. Call Transfer
You are just talking with someone and want to transfer the call to another internal
PBX subscriber or another public telephone network subscriber.
You are talking with somebody
With a tone telephone set:
nn
To transfer the call to another internal PBX subscriber, press
"FLASH" or "R" on your telephone set and then dial the number nn
of the internal transferee
or
to transfer the call to someone from a department , press "FLASH"
or "R" on your telephone set and then dial the number of the
department (10,20,30,40,50 or 60)
or
to get through to the PBX operator, press "FLASH" or "R" on your
telephone set and then dial "9"
or
r...r
to transfer the call to another public telephone network subscriber,
then press "FLASH" or "R" on your telephone set, then "0" and dial
the telephone number r...r of the public line subscriber
(069 111222, e.g.)
With a pulse telephone set:
nn
To transfer the call to another internal PBX subscriber, dial the
number nn of the internal transferee
or
To transfer the call to somebody from a depatment, press the
number of the department (10,20,30,40,50 or 60)
or
r...r
To transfer the call to another public telephone network subscriber,
press "0" and dial the telephone number r...r of the public line
subscriber (069 111222, e.g.)
Further , in either case:
You can wait until the callled party answers the call and speak to it
shortly (your original call is on the background), but you need not
wait.
Hang up. Your call will be transferred.
For call transfer, you can use the PBX memory calling or trunking.
A number of various situations may happen during call transfers. In each of
them, the 2N OMEGA LITE PBX is very user-friendly. Here’s an example:
If you do not wait until the called party answers the call and hang up, the PBX
C