Installation – 2N Mobility Extension Application User Manual

Page 2

Advertising
background image



2N TELEKOMUNIKACE a.s., Modranska 621,143 01 Praha 4


Phone: +420 261 301 500, Fax: +420 261 301 599, e-mail:

[email protected]


The 2N Mobility Extension application enables mobile telephone users to make calls over a PBX

or a GSM gateway from 2N TELEKOMUNIKACE a.s. When calling a contact in a phone directory this
application automatically calls to the PBX and then dials the contact. Thus the application not only makes it
easier to call but also brings savings on calls. In cooperation with a specific PBX 2N NetStar and using the
applications it is possible to set the redirecting, absence message, to log in/out of the group and to
switch profiles.

The application is for mobiles with the Symbian 9 operating system.

Installation


The application 2N Mobility Extension Symbian is installed using the standard tools in the Nokia PC

Suite. The installation file is MobileExt.sis. With regards to the fact that it is possible to change some
parameters after installation (the prefix to the PSTN, the transfer code, etc.) it is necessary to allow the
installation of all the software before the actual installation. (It is set in Application manager -> Options ->
Settings
).




Software installation



Now you can connect your mobile to the computer (by cable or Bluetooth) and run the PC Suite

application. Select “Install Application” and chose the site where you want to save the file MobileExt.sis.
After successfully completing the installation you will be asked to complete the installation on your mobile.

Note. When installing on the disk C:/DATA on your mobile phone create the file Aina.bin. This is where all
of the application’s settings will be stored. By overwriting this file you can change the settings – see the
chapter on Extended Settings).

Advertising