5 2n® external routing machine, Installation, Installation procedure – 2N StarGate/BlueTower v5.6 User Manual
Page 124

124
3.5 2N® External Routing Machine
Installation
CD Image
An automatic installation CD (part No. 507424E) has been created for installation
purposes. This installation CD automatically prepares the system and installs the
requested application.
Minimum PC Hardware Requirements
Procesor: Intel P4, 2,4GHz or higher
RAM: 2048 MB RAM
HDD: 60GB SATA
CD-ROM: Only CD-R
LAN: Ethernet 100BaseT
Installation Procedure
This installation is automatic and requires a very low user interaction.
Follow the instructions below to install a perfectly working system.
Set your PC to use the CD ROM as the default boot device.
Place the installation CD into the CD ROM.
After starting your PC, you will get the following screen. You can choose any of the
available booting options. Automatic installation is the first option and will start in 3
seconds.
Note
The ERM web interface is available in versions ERM v4 and higher!
Caution
By using the installation CD you remove ALL data from the hard drive!