2N Helios IP Verso - Manual (Page 97)

97
2N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.
4.
3.2 Intercom Control as Viewed by External User
Quick Dial Buttons
Press the quick dial button on the basic unit to dial the first position in the phone
directory (Phone Book) depending on the model type. Use extending modules to
extend the number of quick dial buttons to up to 146.
By pressing the quick dial buttons you dial the phone numbers assigned to the
particular Phone Book position. Call setup is signalled by a long intermittent or any
other tone depending on the configuration of the PBX connected.
Repeated pressing of one and the same quick dial button during call setup may initiate
call hangup or call termination plus dialling the next phone number of the called
subscriber, or may be assigned no function; refer to the Intercom Configuration /
. Hardware / Keyboard subsection of Configuration Manual
You can also press the button anytime to hang up if enabled so in the Hang up by
parameter; refer to the # Intercom Configuration / Hardware / Keyboard subsection of
. Configuration Manual
Calling to Phone Book Position
The Phone Book can contain up to 999 programmable positions. 2N
®
Helios IP Verso
The quick dial buttons can only be used for positions 1 through 146, depending on the
number of actually installed buttons. You can dial the other positions using the numeric
keypad if the
function is enabled; refer to the Quick dialling with digits Intercom
. Configuration / Hardware / Keyboard subsection of Configuration Manual
Procedure:
Enter the position number using the numeric keypad (05, 15, 200, e.g. – two
digits at least and four digits at most) and press the button for confirmation.
You can also press the button anytime to hang up if enabled so in the Hang
parameter; refer to the up by # Intercom Configuration / Hardware / Keyboard
. subsection of Configuration Manual
Calling to User-Defined Phone Number
If the (refer to the Telephone function enabled Intercom Configuration / Hardware /
) parameter is selected, you can dial a Keyboard subsection of Configuration Manual
user-defined phone number using the
numeric keypad. 2N
®
Helios IP Verso
Procedure:
Press .
You will hear a continuous tone from the speaker.
Enter the phone number via the numeric keypad and press again to confirm
your dialling.
You can also press the button anytime to hang up if enabled so in the Hang