Connection to digital outputs, Connection to digital inputs, Camera connection – 2N Helios IP Video Kit User Manual
Page 20
20
Connection to Digital Outputs
2N
®
Helios IP Video Kit is equipped with two active 12 V / 650 mA outputs on the
OUT1± and OUT2 terminals. The outputs are overload and short-circuit resistant.
±
Connection to Digital Inputs
2N
®
Helios IP Video Kit is equipped with two digital inputs on the IN1 and IN2 ter
±
±
minals. The digital inputs recognise the following two logic levels: log. 0 for voltage
under 1.1 V a log. 1 for voltage over 3 V. Keep the voltage polarity to make the
function work properly. The function is programmable for either input.
Camera connection
2N
®
Helios IP Video Kit is equipped with two video inputs for analog camera with
composite PAL or NTSC signal. Output from camera connects to VIDEO VGND and
VIDEO IN1/IN2 sockets.
automatically detects signal format.
2N
®
Helios IP Video Kit
If the attached camera has no own power supply, it can be supplied from 2N
®
Helios
from VIDEO +12 V and VIDEO VGND sockets.
IP Video Kit
Warning
Do not exceed the voltage and current limits for the load connected to the
relay contacts as specified in the technical parameters of the device to
avoid device damage.