2N BRI Lite/Enterprise v1.5 User Manual
Page 116
116
ALL GSM
RESET CMD
Reset of all GSM boards by AT command
SYSTEM RESET
CMD
Reset of system by command at&bsys
L1–ERR
(reserved)
L2–ERR
Error of 2. ISDN layer by Q.921
A: unsol.RX(F)
Received packed RR,RNR,REJ with unexpected bit F=1
B: unsol.DM(F)
Received packed DM with unexpected bit F=1
C: unsol.UA(F)
Received packed UA with unexpected bit F=1
D: unsol.UA(–)
Received packed UA with unexpected bit F=0
E: unsol.DM(–)
Received packed DM with unexpected bit F=0
F: peer re–est
Received packed SABME in status OKEST
G: repeated
SABME
Repeated unsuccessful send of packet SABME
H: repeated DM Repeated unsuccessful send of packet DM
I: failed
(TIMREC)
Unsuccessful breaking–up of status TIMREC
J: N(R) error
Received wrong value N(R) – numbering of packets
K: recv.FRMR
Received packed FRMR (information about error)
L: undef.frame
Received unknown type packed
M: (I field)
Received wrong I–packet (numbered packet)
N: frame size
Received packed with wrong length
O: N201 error
Value N201 was exceeded (max. length of packet)
L3–ERR
tout sts #
(p##)
Error of 3. layer isdn: timeout in status # on channel p##
G2–ERR
ATD/ERROR init
(g##)
Error of 2. layer isdn: restart of module g## after
rejected command ATD by GSM network
GSM Cause 150
(g##)
Error of 2. layer isdn: restart of module g## after cause
150 was received (call barred by GSM network)
G3–ERR
tout sts #
(g##)
Error of 3. layer isdn: timeout in status # on module g##