Configuration at commands – 2N BRI Lite/Enterprise v1.3 User Manual
Page 74
74
&CR
...read buffer from the oldest <#...erase & continue>
&BSYS=cmd
...cmd for system (RESET)
&XG
...view conn table/gsm (call states)
(&XG##
...view call details for gsm channel)
&M0
...disable ansi colors
&M1
...enable ansi colors
&M9
...start matrix
&U
...view logged users
&I##
...view gsm moninfo (dBm = signal level whn registering with
BTS,
RxLEV = minimum signal level required by BTS for registering
of GSM module)
Configuration AT Commands
System Settings
%S85=sms
...no answer sms text (max 63 chars)
%S90=mode
...operating mode of GSM module allocation
(0=cyclic mode, 1=locked mode, 2=smart mode
– according to already called minutes)
(for 0 and 2 set LCR group = 3 (any))
%S91=buf,id
...cdr mode (b0=outg, b1=inc, b2=failed,
b3=moninfo)
unit id (0=off, 1..255)
%S92=rep
...report mode (b0=states, b1=tstamp, b2=smp,
b3=lay2, b4=select)
%S98=pin
...sim pin (max 7 digits)
%S99=dd.mm.yy.w/hh:mm:ss ...set date/time (w=1..7 day of week)
%X10=tsec
...external routing tout in sec/10 (5..60,255)
%X20=mmdd,mmdd
...date of hour+1,hour–1 time change
(0=off,0101..1231)
%X22=hh:mm
...0:01..23:59 – time of reset of GSM gateway,
0:00 – no reset
%X80=login/pass
...login name / password (max 15 chars all)
System Control
AT&Gxx=RESET
Reset of GSM module No xx
AT&Gxx=BLOCK
Block of GSM module No xx
AT&Gxx=DOWN
Transfer of GSM module into the sleep mode
AT&Gxx=ON
Transfer of GSM module into the idle mode