1 factory reset – 2N VoiceBlue Next v3.3 User Manual
Page 29
Advertising
29
3.1 Factory Reset
If you forget the password or set the IP interface incorrectly, you can press the RESET
button to the right of the RJ45 Ethernet connector for a long time.
Doing this, you restore the factory default configuration values for all parameters,
including the Ethernet interface parameters and access data. Refer to
for
factory settings.
Caution
Resetting the factory configuration values results in changes of
the Ethernet settings and subsequent necessity to reconfigure
the gateway.
Note
Push the RESET button for a short time (0.5 s) to restart the
GSM gateway.
Advertising