Command shell statuses, Records of events and calls – 2N VoiceBlue Next v3.2 User Manual
Page 91
91
Command Shell Statuses
Command Shell
Name
Description
IDLE
Rest status, awaiting AT commands
REQUEST
Communication with GSM module upon AT&G command is displayed
REPORT
Active tracing
LOGFILE
Content of log file is being written out
CALLFILE
Content of call file is being written out
CALLREAD
Call file records are read
AUTOFILE
Content of incoming call auto routing chart is being written out
QUERY
(not used so far)
SCREEN
(not used so far)
MATRIX
Active matrix screensaver
FUNCFILE
Content of debug file is being written out
LCRFILE
(not used so far)
Telnet Layer
Name
Description
LOGOUT
User logged–out
LOGIN
User is entering name
PASSW
User is entering password
IDLE
User logged–in
Records of Events and Calls
Record Type in Log File
Name
Description
POWER
System power on, power off or reset
INIT
Initialisation of EEPROM (configuration) or Flash (upgrade)
HW–ERR
HW error of plugged–in board
SYSERR
System error (memory error, etc.)
G2–ERR
GSM module layer 2 error (gate2)
G3–ERR
GSM module layer 3 error (gate3)
C4–ERR
Link layer error (call4)