2N VoiceBlue Next v3.1 - Manual (Page 56)

56
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Mobility Extension
The table registers the Mobility Extension users.
Name – enter the user name for calling to VoIP.
User – enter the registration user name for VoIP.
Password – enter the registration user password for VoIP.
GSM number (CLIP) – enter the user SIM card CLIP.
Follow me function – enable/disable call forwarding to a mobile user station
(based on CLIP).
SMS at no answer function – enable/disable sending of information SMS on
missed calls.
Note
You are recommended to read the Mobility Extension section on
page carefully before using the Mobility Extension function.
Ethernet configuration
This window helps you configure the Ethernet interface of your gateway.
Use DHCP – enable/disable the DHCP client function in . 2N VoiceBlue Next
®
IP address – the fixed IP address (v4) of the Ethernet 2N VoiceBlue Next
®
interface.
Subnet mask – the subnet mask for the Ethernet 2N VoiceBlue Next
®
interface.
Default gateway – The IP gateway IP address (v4) in the Ethernet network.
Caution
Incorrect settings, e.g. enabling the service, may DHCP client
result in a denial of access to the 2N VoiceBlue Next
®
configuration. To avoid this, restore the GSM gateway default
settings. Refer to
for details. Subs. 3.1
Tip
In case the gateway is in the DHCP client mode, current
assignments obtained from the DHCP server are displayed in
the
, and items. IP address Subnet mask Default gateway
Login configuration
The window helps you set the access password and name for the 2N VoiceBlue
®
web interface. Use the same data for Telnet connection too. Next
Caution
Remember to the username and password the change during
first gateway configuration to avoid unauthorised access!