2N VoiceBlue MAX v1.4 - Manual (Page 83)

83
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Wireless Engines
AT&Q## – Received GSM signal level (##=00-15)
AT&QALL – Received GSM signal level from all GSM modules
AT&Gxx=atcmd – Send command for AT commands directly to the GSM module
AT&Gxx=at+cnum – SIM card telephone number
AT&Gxx=at+cpin="xxxx" – PIN entering
AT&Gxx=at+clck="sc",1"xxxx" – PIN request enable
AT&Gxx=at+clck="sc",0"xxxx" – PIN request disable
LOG and CDR List
AT&L – Log file listing (PRIGW awaits pressing of the Space bar in every 20
rows)
AT&C – Call file listing (PRIGW awaits pressing of any key in every 20 rows)
AT&CR – Call file listing and deleting (PRIGW awaits pressing of the # key to
delete this row /with call info/ from memory and sends the next row)
Configuration commands
Status Information
AT&V – Overview of all system settings
AT&VI – Overview of ISDN PRI settings
AT&V0 – Overview of basic GSM settings
AT&V# – Overview of GSM group # settings (#=1-8)
AT&VALL – Overview of all GSM group settings
AT&N# – Overview of parameters of network list # (#=1-8)
AT&NALL – Overview of parameters of all network lists
AT&R – Overview of LCR lines
Default Reset
AT&FRES – Reset with gateway factory settings