ADS-TEC OPC7008 - Manual (Page 21)

Industrial PCs OPC7008
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
21
5.3 T
OUCH SCREEN
The control system is equipped with a touch screen monitor. The touch screen monitor is
internally connected with the USB interface. The driver software required for using the
touch screen is integrated in the corresponding operating system, or can alternatively be
installed from the enclosed service CD.
Pos : 25 /D atent ec hni k/Bedienung/ St atus-Anzeig en/ SYS- LED/ SYS- LED für O PC / CPC / PLC / OTC / ITC / VMT (+Monit ore) - Seri e / I PC 5100 / 5300 / 5500 / 1100 @ 1\ mod_1204714132162_6.doc @ 3405 @
5.4 S
TATUS INDICATORS
SYS LED (
BICOLOURED
)
Depending on the colour and type of flashing, different device states are displayed by the
SYS LED.
The following signals are displayed:
• LED lights green The device is ready for operation (Power ON).
• LED is off The device is switched off. (POWER OFF)
Pos : 26 /D atent ec hni k/Schnitts tell en/Sc hnitts tell eneinst ellung/Sc hni ttst elleneins tell ung für OPC 7008 @ 2\ mod_1270819087369_6.doc @ 7582 @