ADS-TEC OPC7008 - Manual (Page 9)

Industrial PCs OPC7008
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
9
1.7 S TANDARDS
This device complies with the requirements and protective aims of the following EC
regulations:
• This device meets the test requirements for granting the CE sign according to the
European test standards EN 61000-6-4 and EN 61000-6-2.
• This device complies with the test requirements in accordance with EN 60950
(VDE0805, IEC950) "Safety of Information Technology Equipment"
• The device meets the EN 60068-2-6 standard test requirements (sinus excitation).
• The device meets the EN 60068-2-27 standard test requirements (shock resistance
test).
Note:
A respective conformity declaration for the authority in charge is available at the
manufacturer and may be viewed on request.
All connected components, as well as cable connections must also meet these
requirements for compliance with the EMC legislation. For this reason, screened bus and
LAN cables including screened connectors must be used and installed according to the
instructions in this user manual.
Pos : 9 /D at entechni k/ Allgemei ne Hinweis e/Auss tatt ungs variant en/Auss tat tungs variant en für O PC6000/ 7000 @ 2\ mod_1265643750549_6.doc @ 7192 @
1.8 E
QUIPMENT VERSION
The system is available in the following equipment version:
Platform including a Flash SSD:
Platform without any rotating mass storage medium (hard disc, etc.) and with an
embedded operating system (Windows CE 6.0 / XP embedded) for stationary use with a
standard Ethernet or with radio networking cards installed on moving commissioning /
forklift equipment.
Pos : 10 /D atent ec hni k/Allgemeine Hi nweise/Li ef erumf ang/Li ef erumf ang für O PC7008 / 7013 / 7015 / 7022 @ 2\ mod_1257320771863_6. doc @ 6773 @
1.9 S COPE OF DELIVERY
Please check that all of the following components are contained in the packaging:
• 1 x device
• With 24V DC devices: 3-pin lead-through plug from Phoenix Contact,
3-pin 3.81
OPC7 with a screw connection
(already connected with
device socket)
• Service CD
Optional delivery scope
• Operating system
Pos : 11 /D atent ec hni k/Betri ebs hi nweis e/ Betriebsort /Betri ebs ort für OPC- Seri e / I PC- Serie / C PC- Serie / PLC- Seri e / ITC-Serie / OTC-Serie @ 0\ mod_1158827335567_6.doc @ 217 @