ADS-TEC IF1000 - Manual (Page 10)

IF1000 series 9
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
3.9 Environmental Conditions
The unit can be put into operation and used under the following conditions. Failure to observe any one of the
specified data will immediately terminate all warranty conditions. ads‐tec cannot be held liable for any damages
arising due to improper device or unit use and handling.
 Permissible ambient temperatue
during operation 5 … 60° C
during operation (UL) 5 … 50° C
during storage ‐20 … 50° C
 Humidity
during operation 10 … 85% without condensate
during storage 10 … 85% without condensate
 Vibration
during operation 1 G, 10 … 500 Hz
(DIN EN 60068‐2‐6)
 Shock
During operation 5 G, with half‐wave of 30 ms
(DIN EN 60068‐2‐29)
Note:
For Use In Pollution Degree 2 Environment Only Type 1 “indoor use only”.