ADS-TEC IF1000 - Manual (Page 13)

IF1000 series 12
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
4.3 Mounting options
The device unit is designed for both top hat rail mounting as well as for wall‐mounting.
4.3.1 Top Hat Rail Mounting
1. The Firewall must be placed obliquely up against the top of the top hat rail.
2. Fix it on by pressing the underside lightly up against the rail.
3. The Firewall must firmly snap into place on the top hat rail.
Abb. 3:
Note:
Check to make sure that the Firewall will not detach itself from the top hat rail by
lightly tugging the underside forward.