ADS-TEC IF1000 - Manual (Page 29)

IF1000 series 28
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
Internal Cut Sets the internal CUT.
Sets the CUT and turns on the CUT LED.
The letters INT will appear in the upper
right corner of the display, indicating that
an internal CUT was triggered. INT will
continue to flash until the internal CUT is
either switched off or acknowledged
automatically.
Perform this test to check the internal CUT
for correct functioning.
Ping‐Test With the aid of the PING‐Test, the
accessibility of an affiliated remote station
is tested. The PING‐Test sends an echo
request packet to the destination address
of the remote station to be tested and then
proceeds with test information assessment.
Enter the destination address that needs to
be tested in IP address form in the
appropriate entry field. It is furthermore
necessary to enter the packet quantity
required to be sent. Said quantity is limited
to a maximum of 10 packets.