ADS-TEC IF1000 - Manual (Page 17)

IF1000 series 16
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
5.1.1 Example configuration IP‐Adresss and Contactname
IP‐Adress
Default IP address 192.168.0.254 needs to be changed into 192.168.1.250 whilst the subnet mask must be
changed from 255.255.255.0 into 255.255.52.0.
The IP address is highlighted and the input window is deactivated. To change the IP, proceed as follows:
Menu Action
Press ENTER to activate the iput mode.
‐> The input focus will be active on the first digit.
Press the RIGHT direction arrow key eight times
‐> The input focus will be active on the 0
Press the UP direction arrow key once.
‐> Change to 1
Press the RIGHT direction arrow key three times
‐> The input focus will be active on the 4
Press the DOWN direction arrow key four times
‐> Change to 0
Now press ENTER to confirm all the changes to the first
line in the input mode.
‐> The overall IP is highlighted
The text message “Please wait” will come up on display
whilst the data is being stored. If the input mode is
exited by pressing ESC, the changes are overruled/
abandoned.
Press the DOWN direction arrow key once
‐> The subnet mask is highlighted
Press ENTER to activate the iput mode.
‐> The input focus will be active on the first digit.
Press the RIGHT direction arrow key six times
‐> The input focus will be active on the 2