AirLive BC-5010-IVS - Manual (Page 25)

5. Configuration of Main Menu
AirLive BC-5010/BC-5010-IVS User’s Manual 20
5.1 Live View
1. Function Buttons
You can use the function buttons to control the camera’s audio, video, and zoom functions.
z : Original screen to full Screen
z : Full screen to original screen
z : Enlarge the image of the camera digitally.
z : Reduce the image of the camera digitally.
z : Snapshot
z : Record video
z / : Click to mute/un-mute the microphone of the camera. When it is
un-muted, you receive the on-site sound/voice where the camera is installed.
NOTE. The button is available only when the microphone function is enabled
from Configuration > Audio of Web Configuration.
z / : Click to enable/disable the speaker of the camera. When it is
enabled, you can broadcast your sound/voice through the camera.
NOTE. The button is available only when the speaker function is enabled
from Configuration > Audio of Web Configuration.
2. Monitor Image Section
The image from BC-5010 / BC-5010-IVS is shown here.
3. Streaming
Select to transmit and record the video using H.264 (MPEG4), or MJPEG compression.
4. Video Output
User can select proper streaming protocol according to networking environment.
5. Active X Caching
The buffer of Active X. If the bandwidth is limited, you can adjust to higher value but the
higher value causes more latency.