AirLive BC-5010-IVS - Manual (Page 49)

10. RS-485
AirLive BC-5010/BC-5010-IVS User’s Manual 44
10.1 RS-485 Settings
The RS-485 option provides the control settings for external device through the I/O port.
Select Enable RS-485 and complete the required settings to activate the RS-485 function
of the camera.
Use Pelco-D: Select this option and then select an Address. When you enable the RS-485
function of the camera, you will be able to use the RS-485 Buttons on the live view screen
to control the camera.
Use Custom Protocol: Select this option to configure the commands protocol manually.
When you select this option, you need to complete the required settings of Port Setting.
You can click Test to test each command that you have assigned. In the Extended
Command 1~5 string boxes, you can customize more buttons and settings for your needs.
Please note that the setting values in the Command Name string boxes should be from the
connected external device (please refer to the manual of the connected device).
10.2 RS-485 PTZ
You can enable RS-485 PTZ function when you have Pan/Tilt Head.