AirLive BC-5010-IVS - Manual (Page 45)

9. Event
AirLive BC-5010/BC-5010-IVS User’s Manual 40
NOTE. Due to the network environment, the camera may not upload number of images
that you set.
9.2 Event Schedule
This menu is used to specify the schedule of Event or Schedule Trigger and activate the
some actions provided by this device. Where the Schedule Trigger will be activated by
user-define interval without event happened.
Follow the steps below to set up the Event Schedule for the camera:
5.
Select Enable and enter the Event Name.
6.
Select the Trigger by: Motion Detection, Digital Input 1, or Digital Input 2.
7.
Select the Action when triggered:
- Enable FTP: The camera will upload the attachment to FTP when triggered.
- Enable EMAIL: The camera will send the attachment to the assigned receiver when
triggered.
- Enable Samba: The camera will transfer the attachment to the network storage
when triggered.
- Enable TCP: The camera will send instant message to the TCP server when
triggered.
- Enable HTTP: The camera will send instant message to the HTTP server when
triggered.
- GO Preset: The camera will move to the preset position when triggered. Please note
that the function is available only when a RS-485 device, such as an external
camera stand with rotation function, is connected to the camera.
- Enable SD CARD: The camera will store the attachment to the SD card when
triggered.
- Enable USB: The camera will store the attachment to the USB flash drive when
triggered.
- Trigger digital output: The camera will trigger the connected device on the
camera’s output for 1~60 seconds (according to the setting of the pull-down menu).
- Audio File Playback: The camera will play voice file when triggered.
8.
When done, click Add. The event profile will be added to the Event list.