AirLive CamPro Express 64 - Manual (Page 28)

27
3.1.5 Pan/Tilt Control Panel
Using this panel to control the P/T function. If there are preset
points to be set to the camera, use the PRESET for operating.
3.2. E-Map Monitor
3.2.1 Configure the E-Map
„ Click on the System Configuration and select the
function.
„ Select the Detail Setting Æ Group Setting and then click on
Group # 0 for setting the top layer of the E-Map. Entering the
Name for Group # 0 and then click on the
button for select the
picture of the map. Press on button for saving the
configuration.
Note: The picture should be in JPEG format.