AirLive CamPro Express 64 - Manual (Page 29)

28
„ Select on the Group # 0 on the left list and click on the button
for adding layer two groups. Enter the Name of the group and
press the
button for choosing the picture of the map. Then
click on button for saving the configuration.
„ Click on the group configured above and then move the mouse
over the picture on the right. The picture should switch to the
map of top layer and the icon should appear.
„ Move the to the desired location. Then press button for
saving the configuration.
„ Select the Camera Setting for building the relationship between
cameras and group.