AirLive CamPro Express 64 - Manual (Page 37)

36
„ Channel List: Use the Channel List to select the desired cameras for
sequence monitoring. You might use the “All Channels” or “All Groups”
for select all cameras.
„ Interval: Set the Interval time for each camera to dwell on the monitor.
„ Start/Stop Button: Use to start or stop the sequence monitoring.
3.5.5 Remote Playback
„ Start by selecting which channel(s) you would like to perform a search
on:
Note: Selected channels will be marked in red.
„ Select “Search by time chart” from the “Search Method” dropdown list
and the Time Chart will be shown on the page.
„ Set the search conditions. The is, set the date period for searching.
„ Results will then be displayed in a “Date/Channel” table and boxes