AirLive CamPro Express 64 User Manual
Page 30
Advertising
29
Select the desired camera on the left list. Setting the Dependent
(belongs to which group) and the Direction for the selected
camera. Then move the
icon over the picture to the desired
location.
Press
button for saving the configuration.
3.2.2
Using the E-Map
Click on the
button for invoking the E-Map Monitor.
Double click on the
icon for entering the sub-layer map. And
the cameras will show on the map. If the Motion Detection
function was enabled, the live video of the camera will pop up on
the map when some event is triggered.
Advertising