AirLive CU-720PIR - Manual (Page 29)

4. Monitor the Image Section
AirLive CU-720PIR User’s Manual 24
If your device is connected to xDSL directly, you might need this feature. However, if your
device is behind a NAT router, you will not need to enable this feature because your NAT
router should take care of this job. As to xDSL environment, most of the users will use
dynamic IP addresses. If users want to set up a web or a FTP server, then the Dynamic
Domain Name Server is necessary.
DDNS:
To enable or disable the DDNS service here.
Server name:
Choose the built-in DDNS server.
DDNSHost:
The domain name is applied of this device.
User name:
The user name is used to log into DDNS.
Password:
The password is used to log into DDNS.