AirLive CU-720PIR - Manual (Page 31)

4. Monitor the Image Section
AirLive CU-720PIR User’s Manual 26
User name:
Type the user name for the PPPoE service which is provided by the ISP.
Password:
Type the password for the PPPoE service which is provided by the ISP.
IP address, Subnet mask, and Gateway (read only):
Shows the IP information got from PPPoE server site.
Status:
Shows the Status of PPPoE connection.
4.2.6 Streaming
RTSP is a streaming control protocol, and a starting point for negotiating transports such as
RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a
"remote control" for controlling the media stream delivered by a media server. RTSP
servers typically use RTP as the protocol for the actual transport of audio/video data.
RTSP Port:
Choose the RTSP port. The RTSP protocol allows a connecting client to start a video
stream. Enter the RTSP port number to use. The default value is 554.
RTP Port:
Specify the range of transmission port number of video stream. The default range is 50000
to 50999. User can specify a number between 1024 and 65535.