AirLive CU-720PIR - Manual (Page 40)

4. Monitor the Image Section
35 AirLive CU-720PIR User’s Manual
Large value will brighten camera.
Large value will contrast camera heavily.
Large value will sharpen camera.
function is able to lower the bitrate a lot,
specially in low light environment.
in IR LEDs. This function is very useful under low illumination
environment even 0 Lux.
In case the Auto mode is selected, a user
the threshold to turn on IR LED. It
should be lower or equal to Day Mode Threshold.
threshold to turn off IR LED. It
minance from the captured video. It’s a useful
reference to set LED ON/OFF Threshold.
Restore to factory image settings.
cy mask window 1 to window 7 and set the name and gray
level for selected window.
Brightness:
Contrast:
Sharpness:
3D De-Noise:
The 3D De-Noise can remove or lower unwanted noise and preserve fine
details and edges as possible. This
e
ICR:
Use built-in photo sensor or manual to control ICR.
In case a user selects manual mode, there are 4 modes: Night (On), Day (Off), Auto or
Schedule to control built-
needs to specify 3 parameters in advance:
Night Mode Threshold (0~10000): this value set
Day Mode Threshold (0~10000): this value set the
should be higher or equal to Night Mode Threshold.
Delay Time: The delay time between LED ON/OFF switching.
Note that Current Value is the current lu
Default Settings:
4.3.2 Privacy Mask
Use this page to specify priva