2 features, 3 system requirements – AirLive CU-720PIR User Manual

Page 7

Advertising
background image

1. Introduction





 

AirLive CU-720PIR User’s Manual

2

1.2 Features

z Easy installation with setup wizard (IP Wizard II)
z ONVIF IP camera
z Built-in PIR sensor for thermal/motion detection
z UPnP device discovery and NAT router transversal for easy installation
z Dynamic IP Service, DIPS®, to search your IP camera from Internet easily
z H.264, MPEG4 and JPEG triple compression simultaneously
z 1.3 Mega-pixel resolution
z Up to 8-profile encoder simultaneously
z 1.3 Mega-pixel or 720P mode selectable
z Up to 30 fps for 720P mode
z Up to 30 fps for 1.3 Mega-pixel mode
z UDP / TCP / HTTP protocols selectable
z IEEE 802.11n wireless LAN (WLAN model)
z WEP/WPA/WPA2-PSK

wireless security (WLAN model)

z 3GPP for 3G mobile remote application
z Digital

zoom

z Built-in

microphone

z Audio

line

out

z Two-way

audio

z Micro SD Card Slot for Local Storage
z Continuous Recording to Micro SD Card and SAMBA Server
z Support P2P Function
z Intelligent motion detection up to 10 zones
z Go to preset once motion triggered
z Image transmission using an FTP or e-mail for event
z DDNS and PPPoE
z Multi-channel control software for surveillance application
z On-line firmware upgrade

1.3 System Requirements

z Microsoft

Internet

Explorer 6.0 or later

z Microsoft Media Player 11.0 or later (to playback recorded file)
z VGA Monitor resolution 1280 x 1024 or higher
z Pentium-4 3.6 GHz or higher
z Memory Size: 1GB or more
z Windows XP, Vista, 7

Advertising