AirLive DS-100 v2 - Manual (Page 13)

2. Installing the Device Server
AirLive DS-100 v2 User’s Manual
10
Connector Description
COM 1
Serial Port for connection with a POS printer.
COM2
Serial Port for connection with a POS printer. Used
for back up when COM 1 malfunctions.
2.4 Hardware Installation
The following diagram illustrates how to connect DS-100 v2 to the POS printer and
Gateways/Controllers. Please follow the steps described below to install hardware:
(1) Attach DS-100 v2 to a power source, either through adaptors provided in the package or
through DC socket with a DC power supply.
(1) Attach POS printer to a power source, through adaptors provided in the package and
turn on the power switch situated on the left side of the device.
(2) Connect POS printer to the COM1 port of DS-100 v2 by a RS-232 cable provided within
POS printer package.
(3) Connect DS-100 v2 to the LAN port of your Gateway/Controller by an Ethernet cable.