AirLive DS-100 v2 User Manual
Page 30
Advertising
5. Troubleshooting
AirLive DS-100 v2 User’s Manual
27
On the DS-100 v2 keypad:
(1) After WIAS-3200N v2 reboots, press the Function button (left-down) for a while until
the Lock LED turns solid
on.
Now the keypad is locked.
(2) To unlock the keypad, press the Function button (left-down) for a while until the Lock
LED
starts to blink.
(3) Select the Lock password digits one by one by pressing the PRE (-) or POS (+) buttons
and then pressing Enter button after each digit. After all the keys are input, the Lock
LED
will turns
off,
which denotes the keypad is unlocked.
*Note:
The default password for DS-100 v2 is “1111”.
Advertising