AirLive DS-100 v2 - Manual (Page 14)

2. Installing the Device Server
AirLive DS-100 v2 User’s Manual
11
*Note:
You need to connect to the correct LAN port if your Gateway/Controller is operating
in Port-based mode.
A.
Make sure mounting surface on the bottom of the DS-100 v2 is grease and dust free.
B.
Remove adhesive backing from your Rubber Feet.
C.
Apply the Rubber Feet to each corner on the bottom of the DS-100 v2. These footpads
can prevent the Switch from shock/vibration.